High temperature submersible pump technical parameters
The high temperature submersible pump is composed of two parts: a three-phase asynchronous motor and a water pump. The motor is directly connected with the upper pump body, and the upper end of the motor shaft is provided with a firm shaft sealing device, which can effectively avoid the communication between the coolant in the motor and the pumped medium, and ensure the long-term safe and reliable operation of the pump. The submersible motor is a submersible asynchronous motor for water-filled wet and vertical wells. The motor and water pump are directly connected through the barrel coupling. The motor winding is a high temperature resistant nylon sheathed polyethylene water resistant magnet wire with a maximum temperature resistance up to 150 °C. It is an essential equipment for extracting high temperature water. It is mainly used for underground water intake and district heating. It can also be used in pools, water tanks, and pressurized applications.
13
2018/11
Ways to increase the suction speed of submersible sewage pumps
The great feature of the submersible sewage pump is that the pump can be installed at high altitude to immediately suck up water from above. This entire process must take about ten minutes or so, but people must sometimes absorb water quickly, so people We should master the way to increase the water absorption speed of submersible pumps, and people will introduce several types in detail.
17
2020/02
Submersible sewage pumps are widely used
Submersible sewage pumps are suitable for chemical, petroleum, pharmaceutical, mining, paper industry, cement plants, steel plants, power plants, coal processing industries, and urban sewage treatment plant drainage systems, municipal engineering, construction sites and other industries. Dirt is also used to pump clean water and corrosive media.
11
2020/02
Method for removing scale of stainless steel submersible pump
Stainless steel submersible pumps can cause scale formation after a long time of use, especially for submersible pumps used in some poor water conditions, this problem is more likely to occur. When the scale accumulates to a certain extent, the speed of the water pump will slow down, so the performance will decrease. Therefore, regular cleaning of the scale in the pump can ensure the normal operation of the pump. Let’s see what the cleaning method looks like
02
2020/01
Frequent starting of submersible pumps is not a good phenomenon
The equipment always starts frequently. If there is no other reason, it is easy for us to think that someone is playing a prank, but sometimes such problems are real. When using a submersible pump, such problems should be dealt with quickly.
12
2019/12