Stainless steel submersible pumps can cause scale formation after a long time of use, especially for submersible pumps used in some poor water conditions, this problem is more likely to occur. When the scale accumulates to a certain extent, the speed of the water pump will slow down, so the performance will decrease. Therefore, regular cleaning of the scale in the pump can ensure the normal operation of the pump. Let’s see what the cleaning method looks like:
If the scale is immersed in oxalic acid, hydrochloric acid is also possible, but the concentration of hydrochloric acid should be controlled. If the acidity is too high, it will corrode the stainless steel submersible pump. If it is water rust, you can use oil to lubricate it or use a pipe wrench . Of course you can’t put hydrochloric acid.
If the motor is not moving, you can apply some loosening fluid to the bearing. After loosening, you can fill with some lubricant. This should be formed without proper maintenance. When not in use for a long time, drain the water and store the desiccant in the pump. Put some rust inhibitor in the water, which will be better. The scale in the stainless steel submersible pump cavity is mainly caused by high water temperature. There is scale in the high temperature. If there is more scale, there will be no gap in the pump cavity and the pump will not move. Therefore, the circulating water should control the water temperature.
The method of cleaning the stainless steel submersible pump is introduced here. At present, there is no more and better method for the cleaning of the pump. The main thing is to rely on everyone to develop the habit of regular cleaning. Do not wait until the scale has accumulated to a certain degree. Affects the operation of the submersible pump during descaling. When we use a submersible pump, we must give full play to its performance and improve the utilization rate of the pump.
